M.tech Admission Guidelines


M.tech(2008) Admission Guidelines

Selection Criteria: The selection is, generally based on GATE rank /score. However, some IITs, NITs and other university colleges may conduct a written test / Interview for selection into M.Tech. In such a case, the GATE score is given 70% weightage and remaining 30% weightage is for the written test / Interview. The exact procedure will be known by referring to the information brochure issued by the colleges for admission into M.Tech. The selection criteria may vary from year to year and from college to college.

* In IISc Bangalore, IIT Madras, Kharagpur, Roorkee, the selection is purely based on GATE score.

* In other colleges apart from GATE score, a written test or interview is being conducted

for selection into M.Tech. If a student possess excellent rank in the GATE, then direct admission will also be given without any interview.

Stipend for M.Tech :

The stipend/Scholarship Rs.5,000/- is available for eligible candidates in the form of Teaching assistance ship or Research assistance ship etc. The teaching assistance ship may be preferred, if possible.

Non Stipend M.Tech:

Most of the IITs, NITs & other colleges have certain seats reserved in the Non-stipend category. Here, the UGC scholarship will not be given. All the expenses shall be borne by the students only. Those students who are economically sound and desperate to join IITs, can apply . Students, even with low GATE score can get good specializations.

MS Programme:

  • Offered by most of the IITs and IISc. The MS course is equivalent to M.Tech. It involves research work and takes about 21/2 to 3yrs to complete the course. Very few seats are available in the IITs. Admissions are given twice in a year (in June & Nov. months). Admissions are based on GATE score + Degree marks + interview. Candidates with reasonably good GATE score and good academic record (> 70% marks) have chances of getting admission in IITs. UGC scholarship will be given throughout the program. Students who can’t get MTech admission in IITs, generally try for MS Course in IITs

Special attention for SC/ST students :

We strongly suggest you to apply for premier institutes like IIT’s irrespective of your percentiles. Luck may favour you.

Special attention for Girls:

Certain universities have girls reservation, eg. Andhra Pradesh. Hence even at lower percentiles compared to boys, girls have fair chances.

Special note for Second Class students:

If you see the rules & regulations of various premier Institutes, 1st class in Engineering is the pre-requisite. If you apply online, your application will be rejected. Hence we suggest you to apply manually with a request letter stating your present strengths substantiating with GATE Score and your desire to do M.Tech in the respective IIT. Request them to give you a chance so that you can prove yourself. Most of the professors would like to encourage the students who are seriously interested, inspite of the above –ve point, if the GATE score is good and the student has a burning desire to join the desired specialization in the desired IIT. They may consider your application with sympathy and may give you a chance after a personnel Interview. some of our old students with second class in their graduation got admission on similar grounds. Be bold and be positive. Definitely, you can reach your goal.

Note:

1.The students are advised to select the first preference carefully, appropriate to their GATE score level as the students are called for interview based on their 1st preference opted, generally

2.Those who have got relatively low scores in the GATE are strongly advised to apply formore number of colleges (not less than 10) so that they can get admission in atleast one college in the desired specialization

3.The students shall be in-touch with the daily English newspapers ( The Hindu, The Indian Express, The Times of India etc.) and Employment News for the M.Tech notifications by various colle
ges.

4.All the above guidelines are only suggestive / advisory. The candidates are requested to go through the information brochure of each college and take decision appropriately. Depending upon their interest.

5.The students may also contact their seniors/friends studying in various colleges for their suggestions and latest information about the colleges

NOTE: The following guidelines for M.Tech admissions have been prepared by us considering the information given by previous students based on their score & Rank

Electronics & Communication Engineering (ECE)

Suggested order of preferences for M.Tech specialization:

1. Communication Systems.

  1. VLSI / Micro Electronics.
  2. Computer Science if interested Strongly recommended in the present day industrial scenario.
  3. Digital Electronics
  4. Systems & Signals
  5. Instrumentation & Controls
  6. Interdisciplinary courses like Satellite Technology, Internet Science, Aerospace, Management, Industrial Engineering ( NITIE – Bombay)
    • The selection will be generally based on the score/Rank obtained in GATE.
    • * In open category the possibility to get the above specializations based on the ranks, will be generally as follows.

* Rank Below – 200 : Communication Systems, VLSI / Micro Electronics in IITs.

* Rank between 200 – 300 : Communication Systems, VLSI / Micro Electronics… (With interview in IITs).

* Rank between 300 – 600 : The remaining specializations (S.No. 3 to 6) in IITs and all the above specializations inNIT’s and Other premier Colleges like BHU, ANNA University College etc., (with interview and written test).

* Rank between 600 – 900 : Other Universities like JNTU, Osmania etc. (With written and Interview).

* Rank more than – 900 : Private Colleges with Direct admission or with Interview.

For interdisciplinary courses percentile will be the main criteria

* The students are advised to apply for more number of Colleges so that they can get

admission in the desired specialization in atleast one or two Colleges. Then the students

can decide to join the appropriate College.

Premier Institutes, in the order of preference :

1. IISc, Bangalore

  1. IIT, Bombay / Kanpur / Madras / Delhi / Kharagpur / Roorkee / Gowhati
  2. IIIT, Hyderabad ( www.iiit.ac.in/pgadmin.html)
  3. NITs : Warangal / Suratkal / Tirichy / Calicut etc…..
  4. BHU, Pondicherry university, BITs, Pilani, Anna University, PSG, Coimbatore, Anna University,Rurkela etc…
  5. Other colleges

Electrical & Electronics Engineering (EEE)

. Suggested order of preferences:

  1. VLSI / Micro Electronics
  2. Electronic Design & Technology (Chip Design)
  3. Computer Science Engineering, if interested. Strongly recommended in the present day industrial
    scenario.
  4. Systems & Signals
  5. Digital Electronics
  6. Instrumentation & Controls
  7. Aerospace Engineering
  8. Power System Operation & Control (PSOC)
  9. Power Electronics (Machine Drives)
  10. Power Systems
  11. High Voltage Engineering (Only IISC)

Premier Institutes, in the order of preference

  1. IISc, Bangalore
  2. IIT, Bombay / Kanpur / Madras / Delhi / Kharagpur / Roorkee / Gowhati
  3. IIIT, Hyderabad ( www.iiit.ac.in/pgadmin.html)
  4. NITIE ( Mumbai) : PGD in Management
  5. NITs : Warangal / Suratkal / Tirichy / Calicut etc…..
  6. BHU, BITs, Pilani, Anna University, PSG, Coimbatore, Anna University, etc…
  7. Other University Colleges……

Mechanical Engineering (ME)

IIT’s : MADRAS & KHARAGPUR are offering direct admissions based on GATE score. ( normally they ask you to give 8 to 10 preferences of specialisations.)

IITs, KANPUR, MUMBAI, ROORKEE, GAUHATI & IISc BANGALORE are giving admissions for some specialisation based on the GATE score directly and some specialisations based on GATE Score + TEST + INTERVIEW. So candidates are advised to opt for first preference carefully, appropriate to their GATE score ( last year admissions GATE SCORE and specialisations will be given in the brochure or website, generally).

IIT, DELHI is giving admissions based on GATE Score + INTERVIEW. In general candidate are called for interview by considering their first preference so candidate are advised to opt for first preference carefully, appropriate to their GATE score.

FOR IIT’S AND IISc THE CANDIDATES ARE ADVISED TO APPLY IN THE FOLLOWING WAY:

All candidates with 99 percentile and above can apply for M.Tech in Design or Manufacturing as first and second priorities based on their interest. The third option is Industrial Engg.

All the above 98 percentile candidates can apply for industrial, thermal and applied mechanics etc.

Above 96&97 percentile candidates can apply to applied mechanics, composites, aerospace engg,

But 97&98 percentile candidates can apply for MS also for good specializations.

All above 90 percentile candidates can apply for MS

In IIT MUMBAI the order of priorities for ASSISTANTSHIP May be given as follows.

1. Teaching assistantship 2. Research assistantship

3. Teaching assistantship with project 4. Research assistantship

And Order of priorities are :

*For above 99 percentile: design, manufacturing, industrial engg, thermal Engg.

*For above 98 percentile: thermal, Aerospace, energy systems, composites,corrosion engg.

*For above 97&96 percentile: energy systems engg, triobology, corrosion engg.

*But 97&98 candidates can apply for MS also for good specialization

*All above 90 candidates can apply for MS

Order of priorities in IIT madras (in mechanical department now they will take only on three specializations-wise, but after first semester based on your performance in first semester they will allot specializations)

1.&2. Design sciences & manufacturing sciences (based on your interest)

3. industrial management ( Humanities department)

4. thermal sciences

5. composites

6 Aerospace engineering

7. Ocean engineering

8. Metallurgical sciences

9. any other specialization of your interest

But 97&98 percentile candidates can apply for MS also for good specialization

All above 90 percentile candidates can apply for MS

The same way for other IIT’s also you can apply.

M.S PROGRAMME: It is equivalent to M.Tech. Admissions are given twice in a year in (JUNE & NOVEMBER) all IIT’s have M.S programme, here the admission is based Gate score + interview + B.tech marks. Generally minimum period is two years but it depends on candidates hard work. If the guide is satisfied with the work then the guide will recommend for awarding MS, if not it may take more time. In general the average time period will be 2½ to 3 years. Candidates who have percentile above 90 with B.tech percentage above 70%. have chances to get this programme.

FOR MS in all IIT’s, THE CANDIDATES WILL BE CALLED FOR INTERVIEW BASED ON GATE SCORE + DEGREE MARKS ( GENERAL METHOD ), BUT SOME TIMES THEY MAY CALL BASED ON GATESCORE ITSELF.

NITIE ( Mumbai) : this is a very good institute in industrial Engg. Here the admissions are based on Gate score + Group discussion + interview. G.D will be conducted generally on the general topics like privatization, how to develop Rural areas, literacy development, terms related to contract and agreement, role of a manager effects of Gulf war on India, Signing on nuclear treaty by INDIA, TSUNAMI and preventive measures, Outsourcing etc. Candidates those who have percentile above 85, will be called for the GD and interview. But fee is 90000 per year and student is entitled to get Rs 5000/- per month as assistantship. After doing PG here you will get a job with min of Rs 8 Lakhs / year. But one thing,you have facility to avail loan in the banks.

PSG college of Engg. Coimbattor: it is a good institute and placement is almost equal to IIT’s. selection is based on Gate + Tamilnadu PG test . First the candidate has to appear for Tamilnadu PG test. Candidates have to apply separately for each department.

NIFFT, Ranchi: Here there are only two specializations, Foundry and manufacturing Engg. Placement is good but in the hardware side only. Admissions are purely based on Gate percentile. 100% placement.

BITS , Pilani: it is also a good institute and is generally next to IIT’s . almost 100% good placement is available. Admissions are based on Gate score. + test for 100 ONE mark QUESTIONS (sometime interview also conducted after test)

NIT, Trichy: This is the top most NIT out of all NIT’s. Here welding technology will be given first preference because, it has very good placement . Admissions are based on Gate score + written test + interview. Here if you complete welding technology specialization you will definitely get job in BHARAT HEAVY PLATES AND VESSELS LTD , VISAKAPATNAM. BUT DESIGN , MANUFACTURING AND OTHER SPECIALISATIONS ALSO EXCELLENT.

THAPAR INSTITUTE OF TECHNOLOGY – PATIALA : Here also they are giving admissions based on GATE + interview. But institute and studies are excellent and almost placement is 100%.

BHU (Benarus Hindu University): good institute, placement is available and admissions are based on Gate score + test. Here manufacturing is very nice.

CIT, Coimbattor : It is also very good institute, good placement and admissions are based on Gate score + Tamilnadu PG test .

NIT Calicutt: Good placement and admissions are based on GATE score only.

VJTI, Bombay: it is very good institute and has 100% placement. But it has only two specializations, automobile Engg and design. Admissions are based on GATE score only. But the notification will come only in the times of India news paper and Mumbai local news papers.

ISI KOLKOTTA offers M.Tech programme in Computer Science and Quality Control &OR. It is on PAR with IIT

NIT Suratkal and Warangal: good institutes , placement is available, and admissions are based on GATE score only. Notification of Suratkal, generally comes in Indian Express.

Delhi College of Engg.: It is also one of the good institute, placement is available and admissions are based on GATE score only.

The next category of Colleges are , NIT Kurukshetra, NIT Alahabad, NIT Baroda , NIT Durgapur, Jodhpur University, Jayachama Rajendra College of Engg. ( JCRCE) Mysore, University College of Engg. Mysore, NIT Nagpur, NIT Indore etc.

The next category of colleges are, S.V. University College of Engg., JNTU, Andhra University College of Engg. Some colleges are available in Bangalore and Karnataka State, some colleges available in Tamilnadu etc. Notifications of these institutes may come in the local dailies. Also this year some private engineering college of AP also started M.Tech like CBIT, Vasavi, GPREC, RGIT etc.

Preferences: Generally Design and manufacturing are treated as equally preferred specializations. Next comes out to be industrial management or industrial engg , next preference goes to the thermal, next is Composites, Aerospace, Ocean Engg., Maintenance Engg., etc.

ABOVE 99 PERCENTILE: They have to apply for all IIT’s and IISc with their interested specializations. They also have to apply for NITIE. If they are between 99 and 99.5 and require design or manufacturing specialization, they have to apply PSG, NIT’s or apply non-stipend (self financing) in IIT’s. etc.

BETWEEN 98 & 99 percentiles: They have to apply for all IIT’s and IISc, They will definitely get seat in IIT’s but not design or manufacturing , but it may be thermal etc. but they have chances to get design or Mfg. If they apply in non-stipend category. They also can apply for NITIE.

BETWEEN 97 & 98 percentiles: They have to apply for all IIT’s and IISc, PSG Coimbuttor, NITIE, NIFFT, for M.Tech, all IIT’s for M.S Programme. You will definitely get seat in IIT’s

but not design or manufacturing or thermal but it may be ocean engg, aerospace engg, etc. But they will have chances to get design or Mfg. If they apply in non-stipend category. Also have chances to get M.S Programme in IIT’ with stipend.

BETWEEN 95 & 97: They can apply for all IIT’s for M.Tech with specializations of Ocean Engg, Aerospace Engg., Maintenance Engg. etc type of least preferred ones with stipend and non stipend. There are chances to get this. You also can apply IIT’s for M.S Programme. You have chances to get this, if you have good percentage in B.Tech and if you perform well in the interview. In addition to this you also have to apply for PSG, CIT, NIFFT, VJTI, NITIE, NIT Trichy, NIT Calicutt, BITS, BHU, NIT Suratkal etc.

BETWEEN 90 & 95: Can apply for M.S Programme in IIT’s . If Candidates have good percentage in B.Tech and if they perform well in the interview they have chances to get a seat. you also have to apply for PSG,CIT,NIFFT,VJTI, NITIE, NIT Trichy, NIT Calicutt, BITS, BHU, NIT Suratkal, NIT-Warangal , NIT Bhopal, NIT Durgapur,all other NIT’s, Karnataka &Tamilnadu Engineering Colleges , SVUCE, JNTU, OUCE, AUCE, etc.

BELOW 90 percentiles: You have chances to get seat in NIT Allahabad, NIT Bhopal , University Engg. Colleges like SVUCE, JNTU, OUCE, AUCE, Karnataka and Tamilnadu engg colleges (Govt. & Private) , Jodhpur University etc. Recently in AP also many Engineering colleges has started M.Tech programs and they are also giving stiphend. All below 90 will definitely get seat in this colleges.

Computer Science and Information Technology

Suggested order of preferences:

1. Software Engineering & Programming

2. Computer Science and Engineering

3. Network & Internet Engineering or Distributed Computing Systems

4. Information Technology

5. Multimedia

6. Embedded systems

Premier Institutes and suggested order of preference.

1. IISc, Bangalore

2. IIT, Bombay / Kanpur / Madras / Delhi / Kharagpur / Roorkee / Gowhati

3. Kanwal Rekhi School of information Tehnology, IIT, Bombay ( For both CSE and IT)

4. IIIT, Hyderabad, Bangalore, Pune, Gwalior (www.iiit.ac.in/pgadmin.html)

5. NITs : Warangal / Suratkal / Tirichy / Calicut etc…..

6. Anna university, Chennai ( www.annauniv.edu)

7. Indian St
atistical Institute, Calcutta

8. BITS, Pilani, Mesra, Ranchi (www.bitmesra.ac.in/index.html)

M.Tech in Computer Engineering M.Tech in Software Engineering

9. University of hyderabad ( www.uohyd.ernet.in )

10. Jadavpur University, Calcutta (www.jadavpur.edu) M.Tech in Computer Science and Engineering

11. SJCE (www.sjce.ac.in)

M.Tech in Network & Internet Engineering

M.Tech in Computer Engineering

M.Tech in Software Engineering

12. Pondicheerry Engineering College ( www.pec.edu )

M.Tech. Specialisation: Distributed Computing Systems

13. BMSE, Bangalore: M.Tech in Computer Science and Engineering

14. Other University Colleges……

Instrumentation Engineering ( EIE )

Suggested order of preferences for M.Tech specialization:

1. VLSI / Micro Electronics.

2. Computer Science if interested Strongly recommended in the present day industrial scenario.

3. Digital Electronics

4. Systems & Signals

5. Instrumentation & Controls

6. Interdisciplinary courses like Satellite Technology, Internet Science, Aerospace, Management, Industrial Engineering ( NITIE – Bombay)

* The selection will be generally based on the Score obtained in GATE for all nterdisciplinary

courses.

* For purely instrumentation based courses, GATE rank is the criteria.

Premier Institutes, in the order of preference :

1. IISc, Bangalore

2. IIT, Bombay / Kanpur / Madras / Delhi / Kharagpur / Roorkee / Gowhati

3. IIIT, Hyderabad ( www.iiit.ac.in/pgadmin.html)

4. NITs : Warangal / Suratkal / Tirichy / Calicut etc…..

5. BHU, Pondicherry university, BITs, Pilani, Anna University, PSG, Coimbatore, Anna University,Rurkela etc…

6. Other University Colleges……

CIVIL ENGINEERING (CE)

The Civil Engineering students are eligible to apply for M.Tech in the following departments.

  • Civil Engineering
  • Industrial Engineering ( NITIE, Bombay)
  • Computer Science (in some colleges only)
  • Remote sensing ( or GIS) in IITs Kanpur, Bombay, Roorke and some other university colleges..
  • Aerospace Engineering.
  • Ocean Engineering.
  • Earthquake Engineering (IIT, Roorke)
  • Rock Mechanics (IIT, Delhi) .
  • Applied Mechanics.(IITs)

Suggested Order Of Preferences:

  1. Industrial Engineering in NITIE, Mumbai (If Management course is interested.)
  2. Computer Science or Structures or or Aerospace Engineering , depending upon the interest.
  3. Transportation
  4. Geotechnical
  5. Environmental
  6. GIS / Remote Sensing
  7. Construction Management
  8. CAD (in IIT Roorke )
  9. Water Resources
  10. Ocean Engineering.
  11. Earthquake Engineering.
  12. Rock Mechanics

Premier Institutes, in the order of preference

  1. IISc, Bangalore
  2. IIT, Bombay / Kanpur / Madras / Delhi / Kharagpur / Roorkee / Gowhati
  3. IIIT, Hyderbad ( www.iiit.ac.in/pgadmin.html) ( Computer Aided Structural Engineering )
  4. NITs : Suratkal / Tirichy /Warangal / Calicut / Nagpur/ Durgapur/ Rourkela etc…..
  5. PSG, Coimbatore; BHU, Anna University, BITs, Pilani; Pune university, CIT, Coimbatore.
  6. Other University Colleges viz. SVU, Tirupathi; JNTU, Ananthapur; JNTU Kakinada; OU, Hyderabad; AU, Vizag; Annamalai University; Visweswara Institute, Banglore; Mysore University, Gulberga University, etc…

7. Private Colleges viz. CBIT, Hyderabad – Structures Siddartha, Vijayawada – Structures etc……

Selection Criteria for M.Tech:

The selection is, generally, based on GATE score/Rank. However, some IITs, NITs and other university colleges may conduct a written test / Interview . In such a case, the GATE score is given 70% weightage and remaining 30% weightage is for the written test / Interview. The exact procedure will be known by referring to the information brochure issued by the colleges for admission into M.Tech. The selection criteria may vary from year to year and from college to college.

Suggestions:

1. To secure admission in II.Sc Bangalore, the rank shall be within top 40, generally.

2. If a student gets more than 98 percentile, there is a definite chance of getting

admission in IITs. The students can put their dream specialization as the first choice

in the order of preferences.

3. If it is between 94 and 98 percentile, the students can try for those IITs where there is

interview for selection. It is advisable not to opt Structures as the first preference. If the

student is from a reputed college or if he/she has good academic record then the student

can opt structures as the first choice.. The students are also advised to apply for NITs

and MS programmes in IITs.

4. If it is between 89 and 94 percentile, the students can try in IITs like Roorkee, Guwhati

etc. but the first choice should be opted very carefully. It is advisable to opt

specializations like Water resources, Earthquake engineering, Architecture, Computer

aided design, etc., as the first choice. They have to apply the NITs and MS programme in

IITs, and other reputed university colleges.

5. If it is below 89 percentile, they are advised to apply NITs, university colleges and private

colleges depending upon the merit level..

NOTE:

* The students are advised to select the first preference carefully, appropriate to their GATE score level as the students are called for interview based on their 1st preference opted. For example, if a 90percentile candidate applies for Structures specialization as the first option in IITs, then there is a danger that the candidate may not be called for interview. In every specilisation, only some number of candidates will be called for interview based on the merit order.

* AMIE candidates can get admissions based on their GATE Score in IIT, Madras, Kharagpur & Roorkee. Whereas in other IITs they require to possess some professional experience and other qualifications.

NITIE (Bombay):

It offers 2 years PG Diploma in Industrial Engineering. It is a management course. It has good campus placements. All the students who have more than 85 percentile are eligible to apply. The admission is purely based on marks secured in the above Group Discussion & Interview to be conducted by it later. Strongly recommended to join. Excellent salary packages.

IISC, Banglore:

Here the M.Tech specializations available for Civil students are Aerospace, Satellite Technology, Structures, Geotechnical, Water Resource Engg. The admission for M.Tech is normally based on GATE score. The top rankers generally opt Aerospace Engg. or Structural Engg. or Satellite Technology depending upon their choice. For these three specializations, the cut-off rank is about 15.

After the above three specializations, the other courses preferred are Geotechnical Engg. & Water Resource Engg. in the order. Generally ranks upto 40 can fetch these specilisations..

For MS course in IISc, the students shall appear for a separate written test (on the Civil Engg. Syllabus) followed by an interview. The number of seats for MS is quite less compared to M.Tech.

IITs Bombay, Kanpur, Delhi & Gowhati:

Admission for M.Tech is based on GATE score and the interview conducted by the IIT. For Structures in IIT, Bombay ,there will be a written test and an interview. For other specializations, only interview is conducted. The interview questions are concentrated mainly on the 1st preference opted for. However, questions from Mathematics etc can also be asked.

If a student possess excellent rank in the GATE, then direct admission will also be given without any interview.

IIT Madras:

Selection is based on GATE score and the interview. The interview panel generally consists of 4 to 5 professors from different specializations. They ask questions from all specializations irrespective of the 1st preference opted . Sometimes, questions are asked only on the first choice.

IIT, Roorkee & Kharagpur :

Generally admissions are given on the basis of GATE score .

IIIT, Hyderabad :

This institute has good placements. Computer aided Structural Engineering and Building Science, are the two specializations available for Civil Engg. students. The Computer Aided Structural Engineering can be preferred. The fee is Rs. 50,000 per semester. Stipend will be given for M.Tech, in the second year only.

The selection is purely based on the performance in a separate written test to be conducted by it all over the Country and interview.

NITs & Other Universities:

Some of these colleges give admissions based on the GATE score and other colleges conduct an interview also.

Computer Science: Civil Engg. students can seek admission in M.Tech Computer Science in REC, Warangal, Anna University(Chennai), Central University(Hyderabad), Osmania University(Hyderabad) etc. Selection is based on the performance in the written test conducted separately by the respective University.

JNTU at Hyderabad (Non GATE M.Tech Programme)

JNTU Hyderabad. conducts a separate entrance test for M.Tech programme. A few scholarships / stipend are avail
able for students who posses relatively good GATE scores. But admission is purely based on the written test to be conducted by it later.

Other University Colleges:

SVU, Tirupathi; JNTU, Ananthapur; JNTU Kakinada; OU, Hyderabad; AU, Vizag, Annamalai University, Visweswara Institute, Banglore, Mysore University, Gulberga University, etc.., In these Colleges admissions are given based on GATE score. All the low score students can apply these colleges.

Private Colleges:

CBIT, Hyderabad – Structures Siddartha, Vijayawada – Structures etc….

These colleges are now offering M.Tech programs. But stipend will be given only to some students. The students with relatively very low GATE scores can apply to these colleges.

Production Engineering (PI)

There is no reservation for PI candidates in IIT’s, they are treating PI candidates along with mechanical only i.e. wherever PI candidates are eligible, they are seeing the percentile/score of mechanical and PI candidates and whoever got high percentile/score for them they are giving seat. But the rank is immaterial.

The same thing is happening with some of the other colleges also. But in some colleges like PSG Coimbuttor, NIFFT Ranchi etc there is reservation for PI.

IIT’s : MADRAS & KHARAGPUR are offering direct admissions based on GATE score ( normally they ask you to give 8 to 10 preferences of specialisations.)

KANPUR, MUMBAI, ROORKEE, GAUHATI & IISc BANGALORE are giving admissions for some specialisation based on the GATE score directly and some specialisations based on GATE Score + TEST + INTERVIEW. So candidates are advised to opt for first preference carefully, appropriate to their GATE score ( last year admissions GATE SCORE and specialisations will be given in the brochure or website).

DELHI is giving admissions based on GATE Score + INTERVIEW. In general candidate are called for interview by considering their first preference so candidate are advised to opt for first preference carefully, appropriate to their GATE score .

FOR THE IIT’S AND IISc THE CANDIDATES HAVE TO APPLY IN THE FOLLOWING WAY: All candidates with 99 percentile and above can apply for M.Tech in manufacturing as first priorities. The second option is Industrial Engg. But in some colleges they allowing you for desin also , in such cases you are required to apply design as second preference.

All above 98 percentile candidates can apply for industrial, thermal and applied mechanics etc

Above 96&97 percentile candidates can apply to applied mechanics, composites, aerospace engg,

But 97&98 percentile candidates can apply for MS also for good specialization

All above 90 percentile candidates can apply for MS

In IIT MUMBAI the order of priorities for ASSISTANTSHIP may be given as follows.

1. teaching assistantship 2. Research assistantship

3. Teaching assistantship with project 4. Research assistantship with projec

And Order of priorities are:

For above 99 percentile: manufacturing, design ( if they allow you) industrial engg, thermal engg

For above 98 percentile: thermal, Aerospace, energy systems, composites, corrosion engg

For above 97&96 percentile: energy systems engg, triobology, corrosion engg

But 97&98 candidates can apply for MS also for good specialization

All above 90 candidates can apply for MS

Order of priorities in IIT madras (in mechanical department now they will take only on three specializations wise,

but after first semester based on your performance in first semester they will allot specializations)

1.&2. manufacturing sciences & Design sciences

3. industrial management ( Humanities department)

4. thermal sciences

5. composites

6. Aerospace engineering

7. Ocean engineering

8. Metallurgical sciences

9. any other specialization of your interest

But 97&98 percentile candidates can apply for MS also for good specialization

All above 90 percentile candidates can apply for MS

The same way
for other IIT’s also you can apply.

M.S PROGRAMME: It is equivalent to M.Tech. Admissions are given twice in a year in (JUNE & NOVEMBER) all IIT’s have M.S programme, here the admission is based GATE score + interview + B.tech marks. Generally minimum period is two years but it depends on candidates hard work. If the guide is satisfied with the work then the guide will recommend for awarding MS, if not it may take more time. In general the average time period will be 2½ to 3 years. Candidates who have percentile above 90 with B.tech percentage above 70%. have chances to get this programme.

FOR MS in all IIT’s, THE CANDIDATES WILL BE CALLED FOR INTERVIEW BASED ON GATE SCORE + DEGREE MARKS

( GENERAL METHOD ), BUT SOME TIMES THEY MAY CALL BASED ON GATESCORE ITSELF.

NITIE ( Mumbai) : this is a very good institute in industrial Engg. Here the admissions are based on Gate score + Group discussion + interview. G.D will be conducted generally on the general topics like privatization, how to develop Rural areas, literacy development, terms related to contract and agreement, role of a manager effects of Gulf war on India, Sighning on nuclear treaty by INDIA, TSUNAMI and preventive measures, Outsourcing etc. Candidates those who have percentile above 85, will be called for the GD and interview. But fee is 90000 per year and student is entitled to get Rs 5000/- per month as assistantship.

After doing PG here you will get a job with min of 8Lakhs / year. But one thing you have facility to avail loan in the banks.

PSG college of Engg. Coimbattor: it is a good institute and placement is almost equal to IIT’s. selection is based on Gate + Tamilnadu PG test . first the candidates has to appear for Tamilnadu PG test. Candidates have to apply separately for each department.

NIFFT, Ranchi: Here there are only two specializations, Foundry and manufacturing Engg. Placement is good but in the hardware side only. Admissions are purely based on Gate percentile. 100% placement.

BITS , Pilani: it is also a good institute and is generally next to IIT’s . almost 100% good placement is available. Admissions are based on Gate score. + test for 100 ONE mark QUESTIONS (sometime interview also conducted after test)

NIT, Trichy: This is the top most NIT out of all NIT’s. here welding technology will be given first preference because, it has very good placement . Admissions are based on Gate score + written test + interview. Here if you complete welding technology specialization you will definitely get job in BARAT HEAVY PLATES AND VESSELS LTD , VISAKAPATNAM. BUT DESIGN , MANUFACTURING AND OTHER SPECIALISATIONS ALSO EXCELLENT.

THAPAR INSTITUTE OF TECHNOLOGY – PATIALA : here also they are giving admissions based on GATE + interview. But institute and studies are excellent and almost placement is 100%.

BHU (Benarus Hindu University): good institute, placement is available and admissions are based on Gate score + test. Here manufacturing is very nice.

CIT, Coimbattor : It is also very good institute, good placement and admissions are based on Gate score + Tamilnadu PG test .

NIT Calicutt: Good placement and admissions are based on Gate score only.

VJTI, Bombay: it is very good institute and has 100% placement. But it has only two specializations, automobile Engg and design. Admissions are based on Gate score only. But the notification will come only in the times of India news paper and Mumbai local news papers.

ISI KOLKOTTA offers M.Tech programme in Computer Science and Quality Control & OR on PAR with IIT

NIT Suratkal and Warangal: good institutes , placement is available, and admissions are based on Gate score only. Notification of Suratkal, generally comes in Indian Express.

Delhi College of Engg.: it is also one of the good institute, placement is available and admissions are based on Gate score only.

The next category of Colleges are , NIT Kurukshetra, NIT Alahabad, NIT Baroda , NIT Durgapur, Jodhpur University, Jayachama Rajendra College of Engg. ( JCRCE) Mysore, University College of Engg. Mysore, NIT Nagpur, NIT Indore etc.

The next category of colleges are, S.V. University College of Engg., JNTU, Andhra University College of Engg. Some colleges are available in Bangalore and Karnataka State, some colleges available in Tamilnadu etc. Notifications of these institutes may come in the local dailies. Also this year some private engineering college of AP also started M.Tech like CBIT, Vasavi, GPREC, RGIT etc.

Preferences: Generally Design and manufacturing are treated as equally preferred specializations. Next comes out to be industrial management or industrial engg , next preference goes to the thermal, next is Composites, Aerospace, Ocean Engg., Maintenance Engg., etc.

ABOVE 99 PERCENTILE: They have to apply for all IIT’s and IISc with their interested specializations. They also have to apply for NITIE. If they are between 99 and 99.5 and require design or manufacturing specialization, they have to apply PSG, NIT’s or apply non-stipend (self financing) in IIT’s. etc.

BETWEEN 98 & 99: They have to apply for all IIT’s and IISc, They will definitely get seat in IIT’s but not design or manufacturing , but it may be thermal etc. but they have chances to get design or Mfg. If they apply in non-stipend category. They also can apply for NITIE.

BETWEEN 97 & 98: They h
ave to apply for all IIT’s and IISc, PSG coimbuttor, NITIE, NIFFT, for M.Tech, all IIT’s for M.S Programme. you will definitely get seat in IIT’s but not design or manufacturing or thermal but it may be ocean engg, aerospace engg, etc. but they will have chances to get design or Mfg. If they apply in non-stipend category. Also have chances to get M.S Programme in IIT’ with stipend.

BETWEEN 95 & 97: They can apply for all IIT’s for M.Tech with specializations of Ocean Engg, Aerospace Engg., Maintenance Engg. etc type of least preferred ones with stipend and non stipend. There are chances to get this. You also can apply IIT’s for M.S Programme. You have chances to get this, if you have good percentage in B.Tech and if you perform well in the interview. In addition to this you also have to apply for PSG, CIT, NIFFT, VJTI, NITIE, NIT Trichy, NIT Calicutt, BITS, BHU, NIT Suratkal etc.

BETWEEN 90 & 95: Can apply for M.S Programme in IIT’s . If Candidates have good percentage in B.Tech and if they perform well in the interview they have chances to get a seat. you also have to apply for PSG,CIT,NIFFT,VJTI, NITIE, NIT Trichy, NIT Calicutt, BITS, BHU, NIT Suratkal, NIT-Warangal , NIT Bhopal, NIT Durgapur,all other NIT’s, Karnataka &Tamilnadu Engineering Colleges , SVUCE, JNTU, OUCE, AUCE, etc.

BELOW 90: You have chances to get seat in NIT Allahabad, NIT Bhopal , University Engg. Colleges like SVUCE, JNTU, OUCE, AUCE, Karnataka and Tamilnadu engg colleges (Govt. & Private) , Jodhpur University etc. Recently in AP also many Engineering colleges has started M.Tech programs and they are also giving stiphend. All below 90 will definitely get seat in this colleges.

NIT Gate Cutoff

NIT Trichy

Gate Admission

Department Programme BE/BTech Subject Procedure Cut-off

2005- 2006- 2007-

06 07 08

Computer Science & Computer Science & Direct AIR- CS-

Engg Engg CS/EE/EE/IN CS Admission 1000 430

Elecrical & Electronics Direct AIR- EE-

Engg Power System EE EE Admission 800 435

Direct EE-

Power Electronics EE EE Admission 435

Electronics & Direct AIR- EC-

Communication Engg VLSI Systems EC EC Admission 1000 505

Communication Systems EC EC Admission 1000 505

Thermal Power Direct AIR- ME-

Mechanical Engg Engineering ME ME Admission 1000 440

Industrial Safety Direct ME-

Engineering ME ME Admission 415

Manufacturing Direct AIR- ME-

Production Engg Technology ME ME Admission 1000 440

Direct AIR- ME-

Industrial Engineering ME ME Admission 1000 425

Direct ME-

Chemical Engineering Energy Engineering ME ME Admission 415

Chemical and Process Control and Direct ME-

Instrumentation Engg Instrumentation ME/EE/IN ME/EE/IN Admission 415

Metallurgical and Direct ME-

materials Engg Welding Engineering ME ME Admission 415

Direct ME-

Physics Non Destructive Testing ME ME Admission 415

NIT Warangal

Gate Admission

Department Programme BE/BTech Subject Procedure Cut-off

2005- 2007-

06 2006-07 08

ME-

Mechanical Engineering Thermal Engineering ME ME Direct Admission AIR<1000 375

Product Design and ME-

Development ME ME Direct Admission AIR<1000 375

Manufacturing ME-

Engineering ME ME Direct Admission AIR<1000 375

Computer Integrated ME-

Manufacturing ME ME Direct Admission AIR<1000 375

Materials Techonology

EE-

Electrical Engineering Power Systems EE EE Direct Admission AIR<1000 438

Power Electronics and EE-

Drives EE EE Direct Admission AIR<1000 438

< /o:p>

Electronics & Electronics EC-

Communication Engg Instrumentation EC/EE/IN EC/EE/IN Direct Admission AIR<1000 509

EC-

VLSI System Design EC EC Direct Admission AIR<1000 509

Advance Communication EC-

Systems EC EC 509

Computer Science Computer Science CS-

Engineering Engineering CS CS Direct Admission AIR<1000 489

NIT Surathkal

Gate Admission

Department Programme BE/BTech Subject Procedure Cut-off

2005- 2007-

06 2006-07 08

Mechanical AIR<150 ME-

Engineering Thermal Engineering ME ME Test/Interview 0 375

Manufacturing AIR<150 ME-

Engineering ME ME Test/Interview 0 375

Electronics & EC/EE/IN/C EC/EE/IN/C AIR<150 EC-

Communication Engg VLSI Design S S Test/Interview 0 430

Communication AIR<150 EC-

Engineering EC EC Test/Interview 0 430

Power & Energy AIR<150 EE-

Electrical Engineering Systems EE EE Test/Interview 0 380

Computer Science Computer Science AIR<150 CS-

Engineering Engineering CS CS Test/Interview 0 365

AIR<150 IT-

Information security CS CS Test/Interview 0 390

Metallurgical and

Materials Engg Materials Engineering ME ME Test/Interview

Mathematical & System Analysis &

Computational Science Computer Application Any Branch Any Branch Test/Interview

Industrial Pollution

Chemical Engineering Control ME ME Test/Interview

NIT Rourkela

BE/BTec Gate Admission Cut-

Department Programme h Subject Procedure Off

2007-

08

Computer

Science Engg Computer Science Engg CS/IT CS Interview 340

Information Security 340

Electronics Telematics and Signal

Engg Processing EC EC Interview 405

VLSI Design and

Embedded System EC EC Interview 405

Electronic Systems

Electrical Engg Communication EE EE Interview 340

Power Control and

Drives EE EE Interview 340

Mechanical Machine Design and

Engg Analysis ME ME Interview 360

Production Engineering ME ME Interview 360

Thermal Engineering ME ME Interview 360

NIT Allahabad

Gate

BE/BTec Subjec Admission Cut

Department Programme h t Procedure -off

2005 2006 2007

-06 -07 -08

Applied Material Science Direct AIR-

Mechanics Engg ME ME Admission 2000 350

Environmental Direct AIR-

Civil Engineering Engg ME ME Adm
ission 2000 350

Direct AIR-

Structural Engg ME ME Admission 1500 365

Computer Computer Science Test/Intervie AIR-

Science Engg CS CS w 1600 360

Test/Intervie AIR-

Software Engg CS CS w 1600 360

Power Electronics Direct AIR-

Electrical Engg and AISC Design EE EE Admission 1600 350

Control

Instrumentation/ Direct AIR-

Power Systems EE EE Admission 1600 350

Electronics and

Communication Direct AIR-

Engg Digital System EC EC Admission 1600 420

Microelectronics Direct AIR-

and VLSI Design EC EC Admission 1600 420

Design of Process Direct AIR-

Mechanical Engg and Machines ME ME Admission 1600 365

Direct AIR-

Production Engg ME ME Admission 1600 365

Product Design Direct AIR-

and Development ME ME Admission 1600 365

NIT Calicut

Gate

Departme BE/BTec Subje Admission

nt Programme h ct Procedure Cut-off

2005 2007

-06 2006-07 -08

Computer

Science Computer Science Direct 98.7 AIR<120

Engg Engg CS/IT CS Admission 9 0 380

Information Security

Digital Systems &

Electronics Communication Direct 98.1 AIR<120

Engg Engg. EC EC Admission 9 0 450

Electronics Design Direct 98.0 AIR<120

& Technology EC EC Admission 8 0 450

Electrical Instrumentation & Direct AIR<120

Engg Control Systems EE EE Admission 96.8 0 390

Direct 96.7 AIR<120

Power Systems EE EE Admission 1 0 390

Direct 97.1 AIR<120

Power Electronics EE EE Admission 3 0 390

Industrial

Mechanical Engineering & Direct 94.9 AIR<120

Engg Management ME ME Admission 1 0 405

Direct 94.9 AIR<120

Thermal Sciences ME ME Admission 3 0 405

Manufacturing Direct 93.2 AIR<120

Technology ME ME Admission 2 0 405

Energy Direct 92.2 AIR<120

Management ME ME Admission 8 0 405

Materials Science & Direct 92.6 AIR<120

Technology ME ME Admission 2 0 405

Source :GATEFORUM

IIT Gate Cutoff

IIT Bombay

Computer Science and Engineering RA Category Cut-off – 498

CUT-OFF for TA Category

S.No

Course Name

Interview Required

Specialization

Qualifying Discipline

GATE Cut Off

General

OBC

1

Aerospace Eng

YES

AE,CE

350

315

2

Chemical Engineering

NO

535

3

Civil Engg

YES

CE1, CE4

CE2

CE3, CE6

For all

500

450

350

450

405

350

4

Computer Science

NO

622

606

5

Earth Science

GG,PG

360

324

6

Electrical Engg

NO

EE1

EE2

EE3

768

759

768

776

7

Energy Systems Engg

YES

For all

375

338

8

Mechanical Engg

NO

702

689

9

Metallurgical Eng & Material Science Corrossion Science & Eng

YES

MM1

MM2

CR

PH

MT

CY

CH

ME

MT

ME

CH

MT

ME

EE

CY

CH

503

369

459

559

589

277

538

474

294

419

327

362

429

452

332

413

503

530

249

484

426

264

377

384

325

386

10

Industrial Engg & Operation Research

YES

CE,CH,CS,IT

IE,PI,PR

ME

ZE

All others

500

400

540

533

550

450

360

486

477

495

11

System & Control
Engg

YES

For All

650

385

12

Environmental Science & Engg

YES

For All

400

360

13

CSRE – Natural Resource Engg

YES

GATE in CS,EC,

EE, IT, MA

All other

440

330

396

397

14

CTARA – Technology & Development

YES

AE,CH,MN,

MT,PI

AG

BT

BY,CY,EV,

EN,MB,

PH,ZS,LS,

ES,AU,IN

CE

ME,ZE,IE

PR

BM

CS

EC,EE

IT

400

260

440

500

290

300

325

450

275

415

340

360

234

396

450

261

270

292

405

247

373

306

15

School of Bioscience & Bioengg.

YES

BM

BT,BY,CY,

MA,PH,

ZE,ZS

CH,CS,

EC,EE,

IN,IT,

ME

400

500

450

360

450

405

IIT Delhi Cut Off

S.

No

Course Name

Specialization

Qualification Discipline

Cut Off

MS

M. Tech

MS(Research)

M. Tech

Gen

OBC

Gen

OBC

Gen

OBC

Gen

OBC

1

Applied Mechanics

Engineering Mechanics

Design Engineering

60% CGPA 6.75

60% CGPA 6.75

75% CGPA 8.5

400

360

600

2

Applied research in Electronics

Radio frequency design and Technology

544

489

3

Chemical Engineering

Chemical Engineering

67% CGPA 8

60% CGPA 6.1

60% CGPA 6.75

60% CGPA 6.75

350

315

405

370

4

Civil Engineering

Const Engg. & Mgmt.

Geotech & Geoenv

Rock Engg. & Und. Str

Structural Engg.

Water Res. Engg

Eng. Engg & Mgmt

Transport Engg.

60% CGPA 6.75

55% CGPA 6.25

534

477

378

594

386

407

499

481

429

340

535

347

366

449

5

Computer Science Eng.

Computer Science & Engg.

60% CGPA 6.75

60% CGPA 6.75

60% CGPA 6.75

60% CGPA 6.75

CS – 580 IT – 600

CS – 520 IT – 540

CS – 580 IT – 600

CS – 520 IT – 540

6

Electrical Engineering

Int. Elec. & Ckt

Control & Auto

Comm. Engg

Comp Tech

Pwr Elec, Electrical Machines & Drives

Power System

60% CGPA 6.75

60% CGPA 6.75

60% CGPA 6.75

60% CGPA 6.75

712

600

644

532

567

EE-537 Others- 723

640

540

579

478

510

EE-483 Others – 650

712

600

644

532

567

EE-537 Others- 723

640

540

579

478

510

EE-483 Others – 650

7

Mechanical Engineering

Design

Thermal

Production

Industrial

60% CGPA 6.75

60% CGPA 6.75

60% CGPA 6.75

60% CGPA 6.75

540

486

570

520

450

450

513

468

405

405

8

Physics

Applied Optics

Solid State Material

60% CGPA 6.75

60% CGPA 6.75

55% CGPA 6.25

55% CGPA 6.25

B.E. (Elec, Elect ronics)- 530 M.Sc Physics – 380

B.E. (Elec, Elect ronics)- 530 M.Sc Physics – 441

B.E. (Elec, Elect ronics)- 477 M.Sc Physics – 342

B.E. (Elec, Elect ronics)- 477 M.Sc Physics – 397

9

Textile Technology

Fibre Sc.

Textile Engg

65% CGPA 7.125

65% CGPA 7.125

65% CGPA 7.125

65% CGPA 7.125

60% CGPA 6.75

60% CGPA 6.75

60% CGPA 6.75

60% CGPA 6.75

450

450

405

405

370

370

333

333

IIT Kanpur GATE Cut off for Direct Admission(CSE)

Category

GENERAL

SC

ST

Subject

2007

2007

2007

CS

700

650

650

IT

750

700

700

EC

750

700

700

EE

750

700

700

Math

750

700

700

IIT Kanpur GATE cut-offs for a call to the interview/written test(CSE)

Category

GENERAL

SC

ST

Subject

2007

2007

2007

CS

580

450

320

IT

630

500

400

EC

600 < /p>

480

350

EE

600

480

350

Math

600

480

350

IIT Kharagpur MTech.2008 Cut off

S.No

GATE paper

Cut Off

SC

ST

OBC Non Creamy

Gen

1

AE

373

221

405

470

2

AG

186

211

233

258

3

AR

249

230

323

351

4

CE

362

251

430

480

5

CH

310

207

350

382

6

CS

381

315

451

482

7

CY

231

362

417

8

EC

425

334

561

585

9

EE

455

391

550

575

10

GG

214

221

353

308

11

IN

394

362

506

541

12

IT

443

319

505

520

13

MA

315

230

489

510

14

ME

350

283

460

491

15

MN

296

179

284

307

16

MT

173

172

236

260

17

PH

259

216

450

467

18

PI

355

224

345

378

19

PY

641

20

TF

270

432

470

IIT Kharagpur MTech.2008 Cut off

S.No

GATE paper

Cut Off

SC

ST

OBC Non Creamy

Gen

1

AE

373

221

405

470

2

AG

186

211

233

258

3

AR

249

230

323

351

4

CE

362

251

430

480

5

CH

310

207

350

382

6

CS

381

315

451

482

7

CY

231

362

417

8

EC

425

334

561

585

9

EE

455

391

550

575

10

GG

214

221

353

308

11

IN

394

362

506

541

12

IT

443

319

505

520

13

MA

315

230

489

510

14

ME

350

283

460

491

15

MN

296

179

284

307

16

MT

173

172

236

260

17

PH

259

216

450

467

18

PI

355

224

345

378

19

PY

641

20

TF

270

432

470

CSE MS (Res) CSY Applications November-December 2008

Shortlisting Criteria:

Full-Time:

GEN CS GATE >= 550 or IT GATE >= 580; AND >= 60% or 6.75 GPA

OBC CS GATE >= 500 or IT GATE >= 520; AND >= 60% or 6.75 GPA

SC/ST CS GATE >= 450 or IT GATE >= 450 AND >= 55% or 6.25 GPA

Part-Time:

GE, OB >= 70% or 7.5 GPA; AND >= 1 yr experience AND res+work <= 50km from IIT-D

SC/ST >= 65% or 7.0 GPA; AND >= 1 yr experience AND res+work <= 50km from IIT-D

List of free E-books for Effective GATE Exam Preparations

List of free E-books



O'Reilly online
http://www.oreilly.com/openbook/

http://sysadmin.oreilly.com/

Computer books and manuals

http://www.hoganbooks.com/freebook/webbooks.html

http://www.informit.com/itlibrary/

http://www.fore.com/support/manuals/home/home.htm

http://www.adobe.com/products/acrobat/webbuy/freebooks.html

The Network Book

http://www.cs.columbia.edu/netbook/

Some #bookwarez.efnet.irc links

http://www.extrema.net/books/links.shtml

Some #bookwarez.efnet.irc fiction

http://194.58.154.90:4431/enscifi/

Pimpas online books (Indonesia)

http://202.159.16.55/~pimpa2000

http://202.159.15.46/~om-pimpa/buku

Security, privacy and cryptography

http://theory.lcs.mit.edu/~rivest/crypto-security.html

http://www.oberlin.edu/~brchkind/cyphernomicon/

My own misc online reading material

http://www.eastcoastfx.com/docs/admin-guides/

http://www.eastcoastfx.com/~jorn/reading/

Computer books

http://solaris.inorg.chem.msu.ru/cs-books/

http://sweetrude.net/~cab/books/

http://alaska.mine.nu/books/

http://poprocks.dyn.ns.ca/dave/books/

http://58-160.skarland.uaf.edu/books/

http://202.186.247.194/~ebook/

http://hooligans.org/reference/

Linux documentation

http://www.linuxdoc.org/docs.html

FreeBSD documentation

http://osiris.imw.tu-clausthal.de:8888/

http://uran.vvsu.ru:8888/

SGI documentation

http://newton.unicc.chalmers.se/ebt-bin/nph-dweb/dynaweb;td=2

http://techpubs.sgi.com/library/tpl/cgi-bin/init.cgi

IBM Online Redbooks

http://www.redbooks.ibm.com/

Digital Unix documentation

http://www.unix.digital.com/faqs/publications/base_doc/DOCUMENTATION/V40D_HTML/V40D_HTML/LIBRARY.HTM

Filesystem Hierarchy Standard

http://www.pathname.com/fhs/2.0/fhs-toc.html

http://www.linuxbase.com/

UNIX stuff

http://www.ucs.ed.ac.uk/~unixhelp/index.html

http://www.uwsg.indiana.edu/usail/

http://www.isu.edu/departments/comcom/unix/workshop/unixindex.html

http://www.franken.de/users/lorien/unix.html

http://www.cs.buffalo.edu/~milun/unix.programming.html

Programmers reading

http://www.webdesigns1.com/perl/ir.html

http://www.ictp.trieste.it/texi/perl/perl_toc.html

http://www.itknowledge.com/tpj/

http://www.plover.com/~mjd/perl/

Java stuff

http://www.cs.brown.edu/courses/cs016/book/

http://polaris.cis.ksu.edu/~schmidt/CIS200/

http://www.daimi.au.dk/dProg1/java/langspec-1.0/index.html

Lisp stuff

http://www.cs.cmu.edu/afs/cs.cmu.edu/project/airepository/ai/html/cltl/mirrors.html

http://www.cs.tulane.edu/www/Villamil/lisp/

Ada stuff

http://www.adahome.com/Tutorials/

Database reading

http://www.bus.orst.edu/faculty/brownc/lectures/db_tutor/index.htm

SQL stuff

http://w3.one.net/~jhoffman/sqltut.htm

http://www.doc.mmu.ac.uk/STAFF/E.Ferneley/SQL/index.htm

http://www.daimi.au.dk/~oracle/sql/index.html

Visual Basic stuff

http://www.vb-world.net/books/

Handbook of Applied Cryptography

http://www.cacr.math.uwaterloo.ca/hac/< /a>

X Window System

http://tronche.com/gui/x/

http://www.cen.com/mw3/refs.html

http://www.gaijin.com/X/

GTK and Gnome stuff

http://developer.gnome.org/doc/GGAD/ggad.html

QT and KDE stuff

http://www.troll.no/qt/

http://developer.kde.org/documentation/tutorials/index.html

http://www.arrakis.es/~rlarrosa/tutorial.html

Corba stuff

http://www.iona.com/hyplan/vinoski/

TCP/IP info

http://www.tunix.kun.nl/ptr/tcpip.html

Misc programmers reading

http://www.cs.wisc.edu/~chilimbi/Pubs.html

http://www.ic.arizona.edu/~nromano/spring99/readings.htm

Some useful tech articles

http://www.sysadminmag.com/

http://www.dotcomma.org/

Considering Hacking Constructive

http://www.firstmonday.dk/issues/issue4_2/gisle/index.html

Eric's Random Writings

http://www.tuxedo.org/~esr/writings/

IBM's History

http://www.ibm.com/ibm/history/story/text.html

Electronic Publishing

http://www.civeng.carleton.ca/~nholtz/ElectronicPublishing.html

Digital processing

http://sunsite.auc.dk/hwb/

Network iQ Router Reference Manual

http://www.teltrend.co.nz/documentation/networkiq/rel74/html/rmtoc.htm

Cisco Product Documentation

http://www.cisco.com/univercd/cc/td/doc/product/

Novell developers appnotes

http://developer.novell.com/research/appnotes/

Icons for your desktop

http://nether.tky.hut.fi/iconstore/

Hackers' Hall of Fame at Discovery Online

http://www.discovery.com/area/technology/hackers/hackers.html

Symbols and signs and ideograms and stuff

http://www.ohiolink.edu/db/oed.html

http://www.ohiolink.edu/db/ahd.html

http://www.ohiolink.edu/db/columbia.html

http://www.ohiolink.edu/db/thes.html

http://www.eb.com:180/

Misc reading material

http://dali.orgland.ru/tcd/

http://www.ud.se/english/press/pdf_publ.htm

Dantes Inferno

http://sophia.smith.edu/~lkleinbe/dante/home.html

http://www.divinecomedy.org/

Books and texts

http://lion.chadwyck.co.uk:8080/

http://www.swan.ac.uk/uwp/lit.htm

Octavo books

http://www.octavo.com/

Project Gutenberg - books and texts

http://www.promo.net/pg/

Project Runeberg - Scandinavian in books and texts

http://www.lysator.liu.se/runeberg/katalog.html

The Elements of Style

http://www.bartleby.com/141/index.html

Bigtext - illustrated books and manuals for DOS

http://www.ozemail.com.au/~kevsol/oldfav.html#bigtext

Breeze - a complete text system for Windows

http://www.ozemail.com.au/~kevsol/sware.html#brzwin

Language links

http://www.machaon.ru/pooh/

Seven Wonders of the World

http://ce.eng.usf.edu/pharos/wonders/

Medieval history

http://www.usaor.net/users/ipm/contents.html

http://www.homeusers.prestel.co.uk/littleton/re0_cath.htm

Stonehenges Legends

http://www.missgien.net/stonehenge/legends.html

In Parentheses historical papers

http://www.inpar.dhs.org/

Bulfinchs Mythology

http://www.kalia.org.il/Qumran/

Index of cults

http://www.totentanz.de/kmedeke/cults.htm

Heretical speculation

http://www.calweb.com/~queribus/gnosticgnus.html

The esoteric Ordo Supremus Militaris Templi Hierosolymitani

http://www.osmth.org/index.html

Runes and Norse stuff

http://www.multiart.nu/grimner/

http://www.eastcoastfx.com/~jorn/runes/

Extinction level events

http://members.xoom.com/korwisi/ele/english/index.html

http://impact.arc.nasa.gov/

http://www.boulder.swri.edu/clark/ncar.html

Stephen Hawkings Universe

http://www.pbs.org/wnet/hawking/html/home.html

The constellations

http://www.dibonsmith.com/constel.htm

Falling into a black hole

http://casasrv.colorado.edu/~ajsh/schw.shtml

Gravity is a push

http://www.epicom.com/gravitypush/

Online audiobooks

http://www.elecbook.com/eblist.htm

NewMedia Classics

http://www.newmediaclassics.com/

Online Books Archive

http://docs.online.bg/

Internet Public Library

http://www.ipl.org/

Rocket-Library.com

http://www.rocket-library.com/categories.asp

PalmPilot E-Text Ring

http://www.webring.org/cgi-bin/webring?ring=pilot_text&id=2&List

Virtual Free Books

http://www.virtualfreesites.com/free.books.am.html

All About Ebooks

Gate2009 CS TOP 300 list

Gate2009 CS TOP 300 list

RNo Stream Name Rank Percentile Marks Score

5330249CSGAUTAM SONEJA 199.99 79.33 1000

7580245CSJITHIN VACHERY 299.99 74967

8290589CSANKUR AGRAWAL 399.99 73.33958

1700061CSCHINTAN RAO H 499.99 72.67950

2060085CSKALE SACHIN PRABHAKAR 499.99 72.67950

1700021CSRONY THOMAS P ROY 699.99 72.33946

1330053CSD ARVIND 799.98 72942

5350213CSALIFIYA TEZABWALA 899.98 71.33933

3400169CSSIDDHARTH ESWARAN999.98 70.67925

1540009CSVENKATA SATYA KIRAN D 1099.98 70.33921

6480097CSBIGYAN BHAR 1299.97 68.67900

1450209CSRAJENDU MITRA 1499.97 67 879

6480413CSSOMAK ADITYA 1599.97 66.33 870

6530289CSSWETA KANODIA 1699.96 66 866

8040149CSUMAIR AZMI 1799.96 65.67 862

7360279CSVINEETH KUMAR T 1899.96 65.33 858

1450345CSMALLADI HARI KRISHNA 1999.96 64.67 850

2420005CSCHAWDA SHYAMSUNDAR 2099.95 64 841

5330297CSANKIT SHAH 2099.95 64 841

2490181CSRAHUL SUDHIR PANDIT 2099.95 64 841

2500293CSKULKARNI MADHAVRAO 2399.94 63.67 837

6580129CSBHUBAN MOHAN SETH 2399.94 63.67 837

5320369CSSANTOSH SAHU 2599.94 63.33 833

1540011CSYAMSANI SRIKANTH 2599.94 63.33 833

2300298CSJOSHI PIYUSH PRAMOD 2799.93 63 829

1630307CSCHANDRAKANTH P 2799.93 63 829

5160584CSSHRUTENDRA HARSOLA 2799.93 63 829

2500261CSSHAHAPURE SADANAND 3199.92 62.67 824

1340237CSLIJO GEORGE 3199.92 62.67 824

6560189CSDYUT KUMAR SIL 3199.92 62.67 824

5160568CSKUSHAL WADHWANI 3199.92 62.67 824

5170445CSPUNEET BIRWA 3199.92 62.67 824

6480365CSANTARA DE 3199.92 62.67 824

6500157CSANIRBAN BASUMALLIK 3799.91 62.33 820

5320469CSNEHA DHAMIJA 3799.91 62.33 820

1700067CSANIRUDH S 3999.9 62 816

7670103CSE SRAVAN KUMAR 3999.9 62 816

6270569CSSATYA NARAYAN SAHOO 3999.9 62 816

1380477CSMUDIREDDY JAGADESH 3999.9 62 816

6510419CSABHRA MAITI 4499.9 61.67 812

6440145CSSHALMOLI GUPTA 4499.9 61.67 812

1700031CSMANISH M MULANI 4699.88 61.33 808

5320179CSPRACHI GARG 4699.88 61.33 808

1460589CSTHAKER MAULIKMIHIR 4699.88 61.3

1580295CSOMAIR MOHAMMED ABDULA 4699.88 61.33 808

1290743CSB M SHRAVAN KUMAR 4699.88 61.33 808

5650377CSMEHTA ANURADHA 5299.87 61 804

2060105CSPANDE ADITYA PADMAKAR 5299.87 61 804

5980057CSSALONI ARYA 5299.87 61 804

6590177CSJOYDIP DATTA 5299.87 61 804

8200077CSAVIJIT GUPTA 5799.85 60.67 799

6510455CSKAUSTAV DEY BISWAS 5799.85 60.67 799

3410493CSANKIT GUPTA 5799.85 60.67 799

3420463CSRAJESH KAUSHIK 5799.85 60.67 799

6530105CSANIRBAN ROY CHOWDHURY 5799.85 60.67 799

6560229CSDEBARGHYA MAJUMDAR 5799.85 60.67 799

7570061CSBALAGOPAL 5799.85 60.67 799

6480321CSPRABHAS KUMAR SAMANTA 5799.85 60.67 799

1290715CSSREENIVASULU VELPULA 5799.85 60.67 799

7100413CSK ABHINAV RAGHUNANDAN 6699.84 60.33 795

5310569CSKUSHAL LADHA 6699.84 60.33 795

3030005CSTHAKKAR KUSHAL MANOHAR 6699.84 60.33 795

1470595CSNALLURI HARIKRISHNA 6699.84 60.33 795

1290563CSB BHARATH 6699.84 60.33 795

6500233CSARGHYA ROY CHAUDHURI 7199.82 60 791

2410193CSKALE SAGAR SUDHIR 7199.82 60 791

1510637CSLEELA SURYA NARAYANA D 7199.82 60 791

7630589CSBHANU KIRAN PERINGANJI 7199.82 60 791

6640461CSCHIRAG KUMAR TAUNK 7199.82 60 791

2270049CSNARKHEDE SURAJ GANESH 7199.82 60 791

1700081CSNIKHIL BHAT 7799.81 59.67 787

7130361CSSENTHILNATHAN N 7799.81 59.67 787

6540457CSSOUMYA PRASAD UKIL 7799.81 59.67 787

1250207CSV PRASHANTH 7799.81 59.67 787

7350177CSM S RAMANUJAN 7799.81 59.67 787

5150160CSBHARAT JAIN 8399.8 59.33 783

1350031CSBAPAT TANUJA GANGADHAR 8399.8 59.33 783

2250209CSSUSHANT SATISH PANDEY 8399.8 59.33 783

3390177CSAMIT KUMAR ARORA 8399.8 59.33 783

1530299CSKOKKULA SAMRAT 8799.79 59 778

1340341CSRAMAKRISHNA R 8799.79 59 778

2160113CSDUPUKUNTLA RAJESH 8799.79 59 778

2390057CSHIRANAND 8799.79 59 778

6490499CSSOMDAS BANDYOPADHYAY 8799.79 59 778

1310445CSANJU SRINIVASAN9399.77 58.67 774

2330086CSKULKARNI VAIBHAV9399.77 58.67 774

6230235CSUMA SANKAR PRADHAN9399.77 58.67 774

1530391CSBHOSALE GANESH9399.77 58.67 774

2160109CSRAUNAK RAMAKANT PILANI9399.77 58.67 774

3390189CSANSHUM GUPTA9399.77 58.67 774

5900197CSMRADUL MAHESHWARI9999.76 58.33 770

6440237CSSUMAN KALYAN BERA9999.76 58.33 770

6440281CSRATHISH DAS9999.76 58.33 770

5360081CSASMITA SHARMA9999.76 58.33 770

2370317CSJAGADISH ONKARNATH9999.76 58.33 770

6580337CSGOURAB ROY9999.76 58.33 770

5410277CSVIPIN PATEL 10599.75 58 766

5340081CSDINESH RAJPOOT 10599.75 58 766

1290285CSASHWANI PRIYEDARSHI 10599.75 58 766

2490225CSBIDKAR SARVESH SANJAY 10599.75 58 766

1340097CSSRINIVAS KARTHIK V 10999.73 57.67 762

1540525CSNEELAMADHAV GANTAYAT 10999.73 57.67 762

6550217CSSUBHAM ROY 10999.73 57.67 762

5850125CSANSHUL GANGWAR 10999.73 57.67 762

6570001CSSUKANTA BHATTACHARJEE 10999.73 57.67 762

1290785CSMYTHRI P K 10999.73 57.67 762

1390739CSPRAVEEN REDDY V 10999.73 57.67 762

7100173CSPRASANNA KARTHIK V 11799.71 57.33 757

1530371CSPARDHI ASHISH DINDAYAL 11799.71 57.33 757

5340009CSNIRMESH NEEMA 11799.71 57.33 757

7650921CSKARTHIK V 11799.71 57.33 757

6270349CSMOHAMMED JUNAID AZAD 11799.71 57.33 757

6480477CSABHIRUP GHOSH 11799.71 57.33 757

1680181CSK SANDESH KAMATH 11799.71 57.33 757

7090205CSDATTA SUBHAJIT ASHOK 11799.71 57.33 757

3400427CSROHIT MANI TRIPATHI 12599.7 57 753

3440177CSRAHUL KUMAR SINGH 12599.7 57 753

6470535CSJOY CHANDRA MUKHERJEE 12599.7 57 753

2500177CSDEEPAK KUMAR JESWANI 12999.68 56.67 749

3410497CSNIDHI ARORA 12999.68 56.67 749

5140032CSDEEPAK SHEVANI 12999.68 56.67 749

3140141CSNEERAJ SHARMA 12999.68 56.67 749

5360493CSADARSH MALU 12999.68 56.67 749

1470405CSK BHARADWAJ 12999.68 56.67 749

7590053CSV RAMAN 12999.68 56.67 749

1390039CSKRANTI RANGINENI 12999.68 56.67 749

6400162CSCH KIRAN KUMAR 13899.67 56.33 745

1700293CSSUBHASHINI V 13899.67 56.33 745

3020209CSKARTIK NAGAR 13899.67 56.33 745

3030025CSSONI HARDIK KIRTIKUMAR 13899.67 56.33 745

6470131CSSOMNATH GHOSH 13899.67 56.33 745

1700039CSRAKESH L VARNA 14599.64 56 741

3400335CSRAVI SHARMA 14599.64 56 741

2410009CSRANGREJ ANIKET SHAM 14599.64 56 741

5310553CSCHETAN GURJAR 14599.64 56 741

5320273CSGAURAV NIGAM 14599.64 56 741

3430249CSPRIANCEU PANDEY 14599.64 56 741

5330325CSABHISHEK JAIN 14599.64 56 741

2250257CSNAVEEN SUKUMAR TAPPETA 14599.64 56 741

3080488CSPATANI JEET RUSHIKESH 14599.64 56 741

6590129CSSANDEEP DASGUPTA 14599.64 56 741

7040053CSANISH S KUMAR 15799.63 55.67 737

1540259CSDANDU VENKATESWARLU 15799.63 55.67 737

5360309CSSHASHANK NAMDEV 15799.63 55.67 737

1290419CSROHIT KUMAR 15799.63 55.67 737

7100345CSM PAWAN KUMAR 16299.6 55.33 732

3400373CSVISHNU KUMAR GARG 16299.6 55.33 732

1510763CSVASOYA JIGNESH JIVARAJ 16299.6 55.33 732

5620389CSSHRADDHA GUPTA 16299.6 55.33 732

3230040CSANUJ JAIN 16299.6 55.33 732

1540457CSPAWAR PANKAJ SURESH 16299.6 55.33 732

1250127CSPRABHANJAN V A 16299.6 55.33 732

6390434CSMOGALLAPALLI NIKHIL 16299.6 55.33 732

6300233CSSOBHAN JACHUCK 17299.58 55 728

3200385CSDHRUV PREMI 17299.58 55 728

5210205CSSHARAD JAISWAL 17299.58 55 728

1510669CSMODI NIRALI NAVIN 17299.58 55 728

1460205CSSAURABH MAHTHA 17299.58 55 728

2270133CSVAIDYA NACHIKET VASANT 17299.58 55 728

2380301CSSNEHA SHRIKRISHNA 17299.58 55 728

1290219CSMUSTAFA SAFDARI 17299.58 55 728

1290583CSSINDHU S 17299.58 55 728

1300599CSMODI KRUNAL ARVINDBHAI 18199.57 54.67 724

3440135CSL ANAND 18199.57 54.67 724

5140440CSVIVEK BHAVSAR 18199.57 54.67 724

1510053CSM VAMSEE KRISHNA 18799.55 54.33 720

5310521CSJASDEEP SINGH TUTEJA 18799.55 54.33 720

7350097CSSHOBITH P J 18799.55 54.33 720

7350353CSBANDARU SARATCHANDRA 18799.55 54.33 720

2160321CSJADHAO VINOD DHANANJAY 18799.55 54.33 720

1490649CSRAJU CHINTHALA 18799.55 54.33 720

1390409CSRAMACHANDRAN 18799.55 54.33 720

1600241CSVADDI KRISHNA CHAITANYA 19499.53 54 716

1300389CSSARADINDU KAR 19499.53 54 716

6810164CSSAI NISHANTH PAREPALLY 19499.53 54 716

1510651CSPRAVEEN ARAVIND BABU T 19499.53 54 716

5730339CSSURABHI AGARWAL 19499.53 54 716

7440112CSPOTLURU RAMAKRISHNA 19499.53 54 716

8350293CSMOHAN VERMA 19499.53 54 716

6460219CSSAGNIK RAYCHOUDHURY 19499.53 54 716

1470105CSPRAVEEN CHANDRAHAS A 19499.53 54 716

8090061CSHARSH VARDHAN 19499.53 54 716

7410028CSANIL KUMAR 20599.5 53.67 711

4110057CSPRASUN KUMAR 20599.5 53.67 711

1510191CSKHEDEKAR SWAPNIL 20599.5 53.67 711

7350361CSSAJIN K 20599.5 53.67 711

1450427CSBHAVANA GANJI 20599.5 53.67 711

7360107CSMOHAMED HANOOSH MP 20599.5 53.67 711

7470085CSGAUTHAMA S NAIR 20599.5 53.67 711

2270273CSRUTURAJ M DHEKANE 20599.5 53.67 711

2480353CSKANE PUSHKAR SHIRISH 20599.5 53.67 711

1390567CSBHANU PRASAD D 20599.5 53.67 711

1390577CSAVULA REDDY THULASI RAM 20599.5 53.67 711

7100521CSVISHNU PRATHAP R 21899.48 53.33 707

2410249CSKULKARNI SWANAND SUHAS 21899.48 53.33 707

3410105CSAMANDEEP BHARTI 21899.48 53.33 707

5520077CSSUSHIL KUMAR SRIVASTAVA 21899.48 53.33 707

7040553CSRAJESH S 21899.48 53.33 707

5150436CSVISHU SAMAIYA 21899.48 53.33 707

1450449CSM V SRIKANTH 21899.48 53.33 707

2490325CSAYACHIT PRAJAKTA 21899.48 53.33 707

1400073CSRAPOL RAJKISHORE REDDY 22699.45 53 703

5310109CSRAVINDRA TIWARI 22699.45 53 703

1510619CSVENKATESH G 22699.45 53 703

5320111CSAKASH DWIVEDI 22699.45 53 703

8330365CSABHINAV SHUKLA 22699.45 53 703

8330381CSANKIT AGRAWAL 22699.45 53 703

5340269CSTANVI BHANDARI 22699.45 53 703

7360227CSNEETHI K S 22699.45 53 703

2380221CSGHOSH ASHIM ALOK 22699.45 53 703

6590253CSDEBARUN KAR 22699.45 53 703

1490707CSA CHANDRAKANTH REDDY 22699.45 53 703

1390561CSMADHAV RAM NIMISHAKAVI 22699.45 53 703

1700075CSKAILASH H D 23999.43 52.67 699

1310423CSSAURABH SRIVASTAVA 23999.43 52.67 699

2520255CSJOSHI NIKHIL SUDHAKAR 23999.43 52.67 699

6420301CSARINDAM SHARMA 23999.43 52.67 699

2430217CSTALATHI PRACHITA JEEVAN 23999.43 52.67 699

1340177CSAMIT SHARMA 23999.43 52.67 699

2350325CSSHAILESH APPUKUTTAN 23999.43 52.67 699

1450191CSKOMMINENI JENNI 23999.43 52.67 699

1680079CSSAMPREET SHARMA A 23999.43 52.67 699

3400057CSMANISH KUMAR SAH 24999.4 52.33 695

8100333CSNITIN KUMAR 24999.4 52.33 695

1300699CSSUBHASIS BHATTACHARJEE 24999.4 52.33 695

3440485CSVASU DEV SHARMA 24999.4 52.33 695

5340085CSVINOD KUMAR PANDEY 24999.4 52.33 695

5340577CSKAMLESH GUPTA 24999.4 52.33 695

6340137CSOM PRAKASH SINGH 24999.4 52.33 695

2580053CSPONNEMKUNNATH RAMOHAN 24999.4 52.33 695

1390477CSKAMBLE MAHENDRA MARUTI 24999.4 52.33 695

1700147CSMUCHARLA GOVARDHAN 25999.38 52 691

1700177CSSHIVARAJ SHETTY 25999.38 52 691

5610485CSPRAFULLA GUPTA 25999.38 52 691

7220325CSSNEHA ANN MATHEW 25999.38 52 691

3230052CSKAMAL SHARMA 25999.38 52 691

5780167CSJITENDRA KUMAR SAHU 25999.38 52 691

1590209CSARUN C S 25999.38 52 691

2300258CSPRAJISH PRASAD 26899.36 51.67 686

6420469CSPARESH MODAK 26899.36 51.67 686

1630215CSMAHESH V 26899.36 51.67 686

5140084CSNAVJOT SINGH 26899.36 51.67 686

2370041CSEDKE PRABHAKAR 26899.36 51.67 686

6470271CSPRASENJIT KARMAKAR 26899.36 51.67 686

6470395CSABHRANIL CHATTERJEE 26899.36 51.67 686

6480213CSSUVENDU CHATTARAJ 26899.36 51.67 686

8400021CSANSHUL GOEL 27799.34 51.33 682

5610361CSRAJ KUMAR 27799.34 51.33 682

6330268CSGIRISH CHANDRA PADHI 27799.34 51.33 682

6550097CSMANJIRA SINHA 27799.34 51.33 682

5850189CSRAJNISH KUMAR 27799.34 51.33 682

1460493CSAVINASH KUMAR 27799.34 51.33 682

5170677CSBHARAT GUPTA 27799.34 51.33 682

1290789CSPREETHI PARTHASARATHY 27799.34 51.33 682

6300001CSTANMAY DEHURY 28699.3 51 678

8400061CSABHISHEK AGARWAL 28699.3 51 678

3200369CSANUPAM JAIN 28699.3 51 678

5010397CSGAURAV TIWARI 28699.3 51 678

1310245CSNARAYANA RAO G S 28699.3 51 678

6420537CSDIPANKAR DUTTA 28699.3 51 678

5130048CSANSHU AGARWAL 28699.3 51 678

1340085CSMANALI KULKARNI 28699.3 51 678

2570142CSBHADKE KAPIL ASHOK 28699.3 51 678

5170537CSANKUR RAJ 28699.3 51 678

1470217CSSAMA ABHINAY 28699.3 51 678

2180465CSSAWANT PRACHEE RAMESH 28699.3 51 678

6380102CSVIJAYAKUMAR KAMABATHU 28699.3 51 678

6680193CSSWATI JAIN 28699.3 51 678

2290394CSSARDESHMUKH BHASKAR 28699.3 51 678

2590093CSPATIL PRANJAL MADHUKAR 28699.3 51 678

8290193CSSHIV KUMAR 28699.3 51 678

1590241CSM VIJENDER REDDY 28699.3 51 678

1390197CSSRIKANTH KYASA 28699.3 51 678

Mathematics III

1 – Solution of ODE of First Order and First Degree [53:50]
2 – Linear Differential Equations of the First Order [50:03]
3 – Approximate Solution of An Initial Value [49:50]
4 – Series Solution of Homogeneous Linear [1:01:15]
5 – Series Solution of Homogeneous Linear [50:56]
6 – Bessel Functions and Their Properties [51:10]
7 – Bessel Functions And Their Properties(Contd..) [52:31]
8 – Laplace Transformation [53:26]
9 – Laplace Transformation(contd..) [55:58]
10 – Applications Of Laplace Transformation [59:53]
11 – Applications Of Laplace Transformation(Contd.) [59:23]
12 – One Dimensional Wave Equation [54:08]
13 – One Dimensional Heat Equation [55:28]

Mathematics II

1 – Mod 2 – Lec 1 Matrix Algebra Part – 1 [50:15]
2 – Mod 2 – Lec 2 Matrix Algebra Part – 2 [59:42]
3 – Mod 2 – Lec 3 Determinants Part – 1 [54:16]
4 – Mod 2 – Lec 4 Determinants Part – 2 [57:37]
5 – Mod 2 – Lec 5 Solution of System Equation [1:02:12]
6 – Mod 2 – Lec 6 Linear Algebra Part-1 [54:40]
7 – Mod 2 – Lec 7 Linear Algebra part – 2 [55:48]
8 – Mod-2 Lec-8 Linear Algebra Part – 3 [54:51]
9 – Mod-2 Lec-9 Linear Algebra Part – 4 [54:09]
10 – Mod-2 Lec-10 Inner Product [54:08]
11 – Mod-2 Lec-11 Linear Transformation Part – 1 [55:29]
12 – Mod-2 Lec-12 Linear Transformation Part – 2 [52:49]
13 – Mod-2 Lec-13 Eigenvalues & Eigenvectors Part – 1 [55:26]
14 – Mod-2 Lec-14 Eigenvalues & Eigenvectors Part – 2 [56:46]
15 – Mod-2 Lec-15 Quadratic Forms [1:01:50]
16 – Mod-2 Lec-16 Diagonalization Part – 1 [57:09]
17 – Mod-2 Lec-17 Diagonalization Part – 2 [1:02:40]
18 – Mod-2 Lec-18 Solution of System of Linear Equation [40:48]
19 – Mod-2 Lec-19 Functions of Complex Variables Part – 1 [55:22]
20 – Mod-2 Lec-20 Functions of Complex Variables Part – 2 [1:03:17]
21 – Mod-2 Lec-21 Taylor Series [50:57]
22 – Mod-2 Lec-22 Laurent Series [53:14]
23 – Mod-2 Lec-23 Rank of a Matrix [59:21]
24 – Mod-3 Lec-1 Complex Numbers & Their Geometrical Representation [51:29]

Mathematics I

1 – Real Number [56:59]
2 – Sequences I [54:48]
3 – Sequences II [44:02]
4 – Sequences III [52:02]
5 – Continuous Function [55:09]
6 – Properties of Continuous Function [01:01:04]
7 – Uniform Continuity [59:46]
8 – Differntiable Functions [55:21]
9 – Mean Value Theorem [50:18]
10 – Maxima – Minima [54:44]
11 – Taylor’s Theorem [53:09]
12 – Curve Sketching [46:04]
13 – Infinite Series I [53:52]
14 – Infinite Series II [51:25]
15 – Tests of Convergence [55:48]
16 – Power Series [53:19]
17 – Riemann Integral [53:43]
18 – Riemann Integrable Functions [59:42]
19 – Applications of Riemann Integral [52:05]
20 – Length of a curve [57:52]
21 – Line Integrals [56:20]
22 – Functions of Several Variables [56:22]
23 – Differntiation [01:00:19]
24 – Derivatives [55:20]
25 – Mean Value Theorem [52:01]
26 – Maxima Minima [57:10]
27 – Method of Lagrange Multipliers [50:02]
28 – Multiple Inegrals [52:16]
29 – Surface Integrals [59:53]
30 – Green’s Theorem [52:34]
31 – Stokes Theorem [53:56]
32 – Guass Divergence Theorem [36:41]

Graduate Aptitude Test in Engineering – GATE

Graduate Aptitude Test in Engineering (GATE) is an all India examination administered and conducted jointly by the Indian Institute of Science and seven Indian Institutes of Technology on behalf of the National Coordination Board – GATE, Department of Higher Education, Ministry of Human Resource Development (MHRD), Government of India.

The GATE committee, which comprises of representatives from the administering institutes, is the sole authority for regulating the examination and declaring the results.

GATE is conducted through the constitution of eight zones. The zones and the corresponding administrative institutes are:

Zone-1: IISc Bangalore
Zone-2: IIT Bombay
Zone-3: IIT Delhi
Zone-4: IIT Guwahati
Zone-5: IIT Kanpur
Zone-6: IIT Kharagpur
Zone-7: IIT Madras
Zone-8: IIT Roorkee

The overall coordination and responsibility of conducting GATE 2010 lies with IIT Guwahati, designated as the Organising Institute for GATE 2010 .

Admission to postgraduate programmes with MHRD and some other government scholarships/assistantships in engineering colleges/institutes is open to those who qualify through GATE. GATE qualified candidates with Bachelor’s degree in Engineering/Technology/Architecture or Master’s degree in any branch of Science/Mathematics/Statistics/Computer Applications are eligible for admission to Master/Doctoral programmes in Engineering/Technology/Architecture as well as for Doctoral programmes in relevant branches of Science with MHRD or other government scholarships/assistantships. To avail the scholarship, the candidate must secure admission to such a postgraduate programme, as per the prevailing procedure of the admitting institution. However, candidates with Master’s degree in Engineering/Technology/Architecture may seek admission to relevant PhD programmes with scholarship/assistantship without appearing in the GATE examination.

Some institutions specify GATE qualification as mandatory even for admission of self-financing students to postgraduate programmes. GATE qualified candidates are also eligible for the award of Junior Research Fellowship in CSIR Laboratories and CSIR sponsored projects. Top rank holders in some GATE papers are entitled to apply for “Shyama Prasad Mukherjee Fellowship” awarded by CSIR. Some government organizations prescribe GATE qualification as a requirement for applying to the post of a Scientist / Engineer.